Instruction on How to Remove ArmRest and Shift console
I am currently not making any profit from these DIYs. If you find web content valuable, please consider donating a few dollars to support the website. Thank you |
Click here to donate:
|
Tools:
- Small flat screw driver
- Philip screw driver
-10mm wrench and bolt
Time: 30min
Step 1: Remove the cigarette holder/lighter (just pull it straight out) see instruction on removing this in the Radio removal on the main website |
|
Step 2: Gently push the gear console up as showed in the picture |
|
Step 3: -Release the hidden connector as showed in picture |
|
Step 4: -Remove the shift console |
|
Step 5: -Remove the armrest by removing the following bolts and the hidden AUX power outlet |
|
Step 6: If you want to remove the whole armrest assembly, follow these steps. remove the indicated bolts |
|
Now you can life the whole armrest assembly out |
|
This is how I run my navigation signal, audio signal to the AMP in the trunk (through the armrest assembly, under the carpet directly to the trunk | |
Reinstall in the reverse order
Good luck
If you find this info useful. Please consider donating a few dollars to support the website and keep it free for everyone. Thank.
Visit since 04/05/03
The DIYs posted on this site are my
personal intellectual property.
Do not use or reprint these information on your own
website without my permission.
© 2002 Banangs.netfirms.com