how to remove your instrument panel
I am currently not making any profit from these DIYs. If you find web content valuable, please consider donating a few dollars. Thank you |
Click here to donate:
|
Tools:
- Small flat screw driver
- Philip screw driver.
- Step1: put in your key, low and extend the steering wheel down/away the dash
as much as possible. Disconnect your battery leaving the steering wheel hanging
out
-Step 2: gently pull the dash bezel out, just pull straight out
-Step 3: slide the dash bezel out, and disconnect the power cable attached to it
-Step 4: remove the 4 Philip screws as showed in the figure below then you can
slide the dash instrument out, disconnect the 2 connectors attached to the
pannel.
Reinstall everything back in the reverse order.
you can replace broken light.... when you have the dash out
Good luck
Visit since 03/07/03
The DIYs posted on this site are my
personal intellectual property.
Do not use or reprint these information on your own
website without my permission.
© 2002 Banangs.netfirms.com