Change out the factory alarm LED with a super bright LED
(per request from some viewers, I create this DIY even I did this mod a while back)
I am currently not making any profit from these DIYs. If you find web content valuable, please consider donating a few dollars. Thank you |
Click here to donate:
|
Parts:
- Small flat screw driver
- Soldering gun..
- Super bright LED (got mine at Fry's), any color you like, LED voltage 3-5V (I
used SuperBrite LED,blue, 20mA T1 5mm LED)
Replacing the OEM light with the LED (if you LED is ok with running at 3V)
The following figure showed how I got my LED to run at 4.5V, some super bright LED can take this voltage
Just connect the new LED to where the old LED was. see picture (left) |
Night picture of the LED
Good luck
Visit since 03/07/03
The DIYs posted on this site are my
personal intellectual property.
Do not use or reprint these information on your own
website without my permission.
© 2002 Banangs.netfirms.com